CAPTAIN
About
Hello, my name is İlkay Gözler. I am a 4th-year student at Istanbul University-Cerrahpaşa, studying Electrical and Electronics Engineering. This year marks my third year in the ATLAS UAV Team, where I serve as the team’s general captain. As the general captain, I am responsible for the organization and management of the team.
ReturnSOFTWARE
About
Hello, my name is Jack Emre Flett. I am a 2nd-year Computer Engineering student. This is my second year in the ATLAS UAV Team. Last year, my responsibilities included image processing, preparing the simulation environment, and autonomous systems. This year, my tasks include structuring and managing the software unit’s process and task distribution, hardware-software integration, and performing final checks on the software we develop.
Return
About
Hello, my name is Koray Közkaya. I am a 1st-year Electrical and Electronics Engineering student at Istanbul University-Cerrahpaşa. I am a member of the software unit in the ATLAS UAV team. This is my second year in the team. Last year, I worked in the fields of image processing and interface development. This year, I am developing a website for our team and continuing my work on interface development.
Return
About
Hello, my name is Berke Canbaz. I am a 1st-year Electrical and Electronics Engineering student. This is my second year in the ATLAS UAV team, where I am a member of the software unit. Last year, I worked on image processing and artificial intelligence. This year, I am continuing my work in the field of artificial intelligence.
Return
About
Hello, my name is Hacer Cansevdi. I am a 2nd-year Computer Engineering student. I have been a member of the software unit in the ATLAS UAV team for about two years. Last year, I worked on developing the flight software for the aerial vehicle and establishing API communication. This year, I am responsible for ensuring telemetry and internet-based communication, as well as developing our own message protocol for communication.
Return
About
Hello, my name is Tarık Öztaş. I am a 2nd-year Computer Engineering student at Istanbul University-Cerrahpaşa. I am a member of the software unit in the ATLAS UAV team. This is my first year in the team, and I am working in the field of artificial intelligence.
Return
About
Hello, my name is Meriç Şenduran. I am a 2nd-year Electrical and Electronics Engineering student at Istanbul University-Cerrahpaşa. I am a member of the software unit in the ATLAS UAV team.This is my first year in the team, and I am assisting with autopilot code compilations.
ReturnELECTRONICS
About
Hello, my name is Ayşe Sena Koçak. I am a 2nd-year Electrical and Electronics Engineering student. This is my second year in the ATLAS UAV team, and I am serving as the captain of the electronics unit. Last year, my responsibilities included GCS operation and autopilot code compilation. This year, I am responsible for the process planning of the electronics unit and autonomy.
Return
About
Hello, my name is Hilal Çetin. I am a 1st-year Electrical and Electronics Engineering student. This is my second year in the ATLAS UAV team's electronics unit. Last year, I was responsible for the rotary-wing UAV hardware, gimbal system, and parameter control. This year, I am working on the fixed-wing UAV electronic system design, parameter optimization, and autopilot compilation.
Return
About
Hello, my name is Nilsu Aydoğan. I am a 1st-year Electrical and Electronics Engineering student. This is my second year in the electronics unit of the ATLAS UAV team. Last year, I was responsible for the aircraft gimbal, the overall electronic integration of the vehicle, and parameter control for flight optimization. This year, in addition to my previous responsibilities, I am working on RTK, the aircraft's payload release system, and the electronic design of the vehicle.
Return
About
Hello, my name is Şevval Çelik. I am a 2nd-year Electrical and Electronics Engineering student. This is my second year in the ATLAS UAV team. Last year, my responsibilities were designing the aircraft's payload release systems and working with the antenna tracker. This year, my responsibilities include the design of the aircraft's payload release system and the aircraft's electronic design.
Return
About
Hello, my name is Buğra Köklü. I am a second-year student at Istanbul University-Cerrahpaşa, studying Electrical and Electronics Engineering. I am a member of the electronics unit in the ATLAS UAV team. This is my first year on the team. This year, I am working on programming the flight controller.
Return
About
Hello, my name is Yusuf Eren Özdemir. I am a 1st-year Electrical and Electronics Engineering student at Istanbul University-Cerrahpaşa. I am a member of the electronics unit in the ATLAS UAV team. I have recently joined the team this year, and I am working in areas such as propulsion system design, electronic integration, and electronic circuit design.m
ReturnMECHANIC
About
Hello, my name is Ali Asker Erdağı. A first-year Mechanical Engineering student at Istanbul University-Cerrahpaşa. This is my second year on the team, and I serve as the Captain of the Mechanical Unit. Last year, I was responsible for wing design and production, aerodynamic calculations, structural and aerodynamic analysis of the fixed-wing UAV, as well as the design and production of the gimbal mechanism. This year, I am in charge of the structural and aerodynamic analyses and optimization of the UAVs, as well as managing task distribution and overseeing processes within the mechanical unit.
Return
About
Hello, my name is Ece Türkoğlu. I am a 2nd-year student in Metallurgical and Materials Engineering. This is my second year in the ATLAS UAV Team. Last year, I was responsible for the tail design, production, and analysis of our fixed-wing UAV. This year, I am in charge of the fuselage design, production, and component placement in collaboration with the electronics unit for our fixed-wing aircraft.
Return
About
Hello, I am Kadir Alagöz, a second-year Mechanical Engineering student at Istanbul University-Cerrahpaşa. I am a member of the Mechanical Unit in the ATLAS UAV team, and this is my second year on the team. Last year, I was responsible for the design and production of the fixed-wing UAV’s landing gear and wings. This year, I am in charge of the optimization and R&D of the fixed-wing UAV.
Return
About
Hello, I am Arda Çelikkol, a first-year Mechanical Engineering student at Istanbul University-Cerrahpaşa. I am a member of the Mechanical Unit in the ATLAS UAV team, and this is my first year on the team. I am currently working on the design of the UAV body and determining its center of gravity.
Return
About
Hello, I am Burak Efe Gökyar, a first-year Mechanical Engineering student at Istanbul University-Cerrahpaşa. I am a member of the Mechanical Unit in the ATLAS UAV team, and this is my first year on the team. This year, I am working on the tail design and landing gear configuration.
Return
About
Hello, I am Alper Can Mavili, a second-year Electrical and Electronics Engineering student at Istanbul University-Cerrahpaşa. I am a member of the Mechanical Unit in the ATLAS UAV team, and this is my first year on the team. I am working on wing and gimbal design within the team.
Return
About
Hello, I am Ömer Yiğit Sevingen, a first-year Mechanical Engineering student at Istanbul University-Cerrahpaşa. I am a member of the Mechanical Unit in the ATLAS UAV team, and this is my first year on the team. This year, I am working on payload drop and wing-related tasks.
ReturnSPONSORSHIP
About
Hello, I am Süeda Ünal, a second-year Industrial Engineering student. Last year, I was part of the Mechanical Team and was responsible for the design of the payload drop system. This year, I am working in the Promotion and Sponsorship Unit, focusing on developing collaborations to support the sustainability of our team.
Return